BREAKER DRAW FRAME

BREAKER DRAW FRAME

Draw frame is a very critical machine in the spinning process. It's influence on quality, especially on evenness is very big. If Draw frame is not set properly, it will also result in drop in yarn strength and yarn elongation at break. The faults in the sliver that come out of Draw frame cannot be corrected. It will pass into the yarn.

             MODEL NUMBER: LDO-6

             MANUFACTURER: LMW

In whole spinning process we always reduce the linear density of raw material. In carded sliver variation is more in density, so to get uniform sliver, this process of drawing the sliver has to be carried out. Here the drafting and doubling occurs together sliver mixing is also done in this process, hence it is of great importance to carry out the process of DRAWING

OBJECTIVE:

1)      To parallelize and straighten the fibers in card sliver along the sliver axis.

2)      To improve the regularity in linear density of card sliver by doubling.

3)      Mixing/ blending of different type of fibers to give a homogeneous blending.

4)      To remove the leading and trailing hooks through the breaker and finisher draw frame.

5)      To lay the sliver in can with uniform coils forming a clear center hole.

6)      Micro dust removal.

7)      To improve the sliver quality.